Customized modern furniture – old elm furniture maintenance precautions

Many people will ask: How is the quality of old elm furniture? You need to know the old elm furniture maintenance precautions.

In fact, the old elm wood is tough, the texture is clear, the hardness and strength are moderate, and the engraving method is generally used for openwork and relief. The planing surface is smooth and the pattern is beautiful. It is one of the main furniture materials in the Ming and Qing Dynasties.

Customized modern furniture - old elm furniture maintenance precautions

Old beech furniture should always be dusted and glazed. It is not only bright and moisture-proof. It can be used to protect the furniture liquid in advance. The glazing wax or enamel paint can hinder the infiltration of water vapor into the furniture to a certain extent.

The raw materials of the furniture factory are made of northern old elm furniture, which has the characteristics of dry wood, clear wood and beautiful appearance. It not only maintains the characteristics of traditional Chinese furniture, but also conforms to the practicality of modern furniture. On this basis, certain The furniture factory combined with the needs of the market, newly designed new Chinese antique furniture and modern furniture series, deeply loved by Chinese and foreign consumers.

Water content control method: Firstly, the natural drying principle of eucalyptus should be used to control the indoor moisture content through ventilation and heat sink. Secondly, the moisture content after drying of eucalyptus should be controlled, especially for households in winter construction. It can not be put into production immediately after drying, and should be used indoors for 24 hours before use.

Separating agent or paint stripper can be used. The separating agent is almost 50 yuan. It can be directly brushed onto the original paint surface to separate the new paint from the old paint. However, it must be protected and the taste is quite large. A paint is not available, but rather a softening of the surface paint film.

If you use a paint remover, you need to grind the No. 0 abrasive cloth in about ten hours. You don’t need to use it very much just to get rid of the paint film. At this time, you can check whether the original old elm furniture wood has holes or cracks. You can use the putty to level, but pay attention to the shrinkage joints of the door and the form, do not fill the atomic ash, otherwise it is easy to expand the wood product, this time you can make new paint.

It not only maintains the characteristics of traditional Chinese furniture, but also meets the practicality of modern furniture. The moisture-proof care is a small coup: solid wood furniture should be maintained with special cleaning agents. It can be evenly coated on the furniture surface with protective wax or special cleaning agent, then light. Wipe gently to keep it shiny and moisture-proof.

Customized modern furniture - old elm furniture maintenance precautions

If the furniture of the wood-based panel is not well sealed or damp, it is easy to absorb water and cause the furniture panel to expand and damage. Pay attention to waterproof when using it. Install a waterproof pad under the furniture leg that is easy to absorb water. Keep the wall near the exterior wall and the bathroom. Good ventilation distance.

The combination of wood and wood furniture: from the appearance of solid wood furniture, the natural texture, feel and color of wood are exactly the same as solid wood furniture, but in fact it is the furniture mixed with solid wood and wood-based panels, that is, the frame is made of solid wood.

If you live in a low-rise bungalow, try to make the legs of the furniture higher, otherwise the legs will be easily corroded and corroded. If possible, try to give the “foot pads” on the legs of the new beech furniture. Put the new beech furniture in the sun, especially in front of the large glass window facing south. The direct sunlight will cause the furniture to fade and crack. In order to prevent the deformation of the new beech furniture, try to avoid heavy objects placed on the surface of the furniture for a long time. For example, TVs, fish tanks, etc., should be placed with a soft film when placing objects, and the movement should be light when moving and placing, so as not to damage.

There are many old elm furniture maintenance precautions. This also reflects the quality of this kind of furniture. Now you know the precautions for the maintenance of old elm furniture? I think you should know. Recently, the custom modern furniture has become popular.Is furniture custom the same method used in your home?

Tagged: Tags

Leave a Reply

Your email address will not be published. Required fields are marked *